Product Information : Automotive
HKS-9609B (English)
Motor HILS Module for FlexRIO
HKS-9609B has multifunctions, that can be used 50MS/s on NI FlexRIO Vertex5.
| Product Code | HKS-9609B |
|---|---|
| SRP | DISCONTINUED |
Overview
NOTE : This product was discontinued.
HKS-9609B is one of the third-party adapter modules for NI FlexRIO.
This module provides high speed sampling rate and wide voltage range with multiple I/O channels that is suitable for motor HILS simulation.
Delivery expectation time:3weeks to 4weeks
Specification
Analog Input
|
Non-isolated |
YES |
|---|---|
|
Output CH |
8ch |
|
Resolution |
16bit |
|
Sampling rate |
50MS/s |
|
Latency |
70ns |
|
Input range |
differential +/-12V |
|
Analog filter |
200kHz |
|
Input absolute maximum rating |
+/-15V |
Analog Output
|
Non-isolated |
YES |
|---|---|
|
Output CH |
8ch |
|
Resolution |
16bit |
|
Sampling rate |
50MS/s |
|
Setting time |
20ns |
|
Output range |
single end +/-12V |
|
Output current |
5mA to 20mA select resistor for current limiting or impedance matching when ordered |
|
Output resistance |
0.3 ohm to 2k ohm select resistor for current limiting or impedance matching when ordered |
|
Analog filter |
200kHz |
|
Disconnect switch |
existence |
Digital Input
|
Non-isolated |
YES |
|---|---|
|
Input CH |
16ch |
|
Sampling rate |
50MS/s |
|
Latency |
8ns |
|
Input range |
0.8V以下 2.0V以上 |
|
Input current |
5uA |
|
Input absolute maximum rating |
-0.5V to 6.5V |
|
Pull-up resistance |
5V/4.7k ohm |
Digital Output
|
Non-isolated |
YES |
|---|---|
|
Output CH |
16ch |
|
Sampling rate |
50MS/s |
|
Latency |
8ns |
|
Output low voltage |
less than 0.2V |
|
Output hi voltage |
more than 4.8V |
|
Output current |
+/-10mA |
|
Output absolute maximum rating |
-0.5V to 5.5V |
Documentation
The Specification of HKS-9609B (PDF形式 789.69KB)
About FlexRIO
The National Instruments FlexRIO combines field-programmable gate array (FPGA) modules and adapter modules.
User can program with the NI LabVIEW FPGA Module and adapter modules that provide high-performance analog and digital I/O. The adapter modules can be interchangeably compounded and define the I/O available in the LabVIEW FPGA programming environment.
References
Learn more about the NI CompactRIO/FlexRIO platform for prototyping and embedded design at Embedded System Design .
